RC Hobbies
-
- Posts: 12
- Joined: Mon Feb 13, 2017 12:37 am
- Location: Ellsworth, IL
- Airshow4444
- Posts: 179
- Joined: Sat Feb 04, 2017 3:40 pm
- Location: Hampton,VA
- Contact:
I've always wanted to get into it but never really did too much research. Any good sites I should look at for a beginner?
0 x
Ricky Matthews - AirshowStuff Photographer/Reporter
I'm into R/C & shoot the local events. I started into the building & flying of model airplanes in 1959 & have been in & out of the hobby a few times. It's very easy to get into these days because you can buy a flight simulator (for your computer) & already built models that just need simple assembly to fly. Many manufacturers sell trainers as a package that includes the plane which can be electric or wet fuel powered, a transmitter, all servos & a receiver installed & if it's electric a battery plus battery charger. In many situations you can shop in the morning & fly in the afternoon.
Power for these things has grown from a small glow plug ignition engine (now referred to as Nitro) or diesel to multi cylinder in line, or horizontally opposed or even radial gas engine to gas turbines.
This is a very popular model which is available from many manufacturers in various forms including with electric retracts. Made from different forms of foam (think styrofoam but a bit stronger), electric powered and replacement parts readily available. No need to learn how to build if that isn't your thing, and there are some really big planes available that are built & covered but need assembly.
INGR3558 by Larry Ingram, on Flickr[/img]
Popular web sites are plentiful. Search out RC Universe, RC Groups, RC Canada, or even RC forums to find web addresses.
Power for these things has grown from a small glow plug ignition engine (now referred to as Nitro) or diesel to multi cylinder in line, or horizontally opposed or even radial gas engine to gas turbines.
This is a very popular model which is available from many manufacturers in various forms including with electric retracts. Made from different forms of foam (think styrofoam but a bit stronger), electric powered and replacement parts readily available. No need to learn how to build if that isn't your thing, and there are some really big planes available that are built & covered but need assembly.
INGR3558 by Larry Ingram, on Flickr[/img]
Popular web sites are plentiful. Search out RC Universe, RC Groups, RC Canada, or even RC forums to find web addresses.
Last edited by Larry I on Fri Feb 24, 2017 2:40 pm, edited 2 times in total.
0 x
- Copperbeltjack
- Posts: 71
- Joined: Wed Feb 08, 2017 11:06 pm
- Location: Seattle, WA
- Contact:
I used to fly when I managed a local hobby shop, but as of late I haven't dusted off the ol' transmitter and birds.
I have a couple electric warbirds in my hangar currently:
I have a couple electric warbirds in my hangar currently:
- E-Flite UMX PT-17 Stearman
- E-Flite Hawker Hawker Hurricane 25e
- Blade mSR
I'd look through Horizon Hobby (http://www.horizonhobby.com/category/airplanes), Great Planes (http://www.greatplanes.com/).Airshow4444 wrote: ↑Tue Feb 14, 2017 2:55 am I've always wanted to get into it but never really did too much research. Any good sites I should look at for a beginner?
0 x
Who is online
Users browsing this forum: No registered users and 6 guests